Suitcase series

SSuitcase is very light weight with only 3.5KG, matched with Wardrobe casing which can be flexibly extend the amplifier into different applications.
Multi combination, Small size and large power, Suitcase series is the best choice for portable power amplifier.
With Universal Mains Regulated SMPS power supply and Class D power modules, the Suitcase4250S and Suitcase4250T combines in the same amplifier all the functional requirements found on most sound reinforcement applications.

Features

  • Class D power modules.
  • XLR signal input and link connectors.
  • SpeakON NL4 and binding-post output connectors.
  • Routing mode selector on the back panel (stereo / bridge / parallel).
  • Channel independent power and 0dB /-5dB / -10dB / -20dB/ indicators on the front panel.
  • Channel independent protection and clip warning indicators on the front panel.
  • Ultra-low unit weight.
  • Fresh and sweet sounding characteristics.

Applications

  • Sound reinforcement applications with mid power density and good sounding requirements.
  • Small to mid sized bar/café/lounge installation.
  • Portable or rental industry PA system.

Specifications

ModelSuitcase600Suitcase800Suitcase4250SSuitcase4250T
Output power
8Ω Stereo*600W x2800W x2230W x4230W x4
4Ω Stereo**1000W x21400W x2440W x4440W x4
8Ω Bridge**2000W2800W860W x2860W x2
Other specifications
Frequency Response (@8Ω)20Hz – 20kHz (±1dB)20Hz – 20kHz (±1dB)20Hz – 20kHz (±0.5dB)20Hz – 20kHz (±0.5dB)
THD+N< 0.12%< 0.12%< 0.02%< 0.02%
S/N Rate≥ 98dB≥ 98dB≥ 98dB≥ 98dB
Input sensitivity1.0V1.0V0.775V0.775V
Input Impedance (bal/unbal)20kΩ / 10kΩ20kΩ / 10kΩ40kΩ / 20kΩ40kΩ / 20kΩ
Voltage Gain37dB38dB34.5dB34.5dB
Output circuitry Class D
CoolingAir flow from front to rear
ProtectionSoft start, VHF, DC, short circuit, over load, clip limit, over heat, progressive volume
Connection
InputBalance input XLR-F, Balance output XLR-M
OutputNL4 SPEAKONNL4 SPEAKONNL4 SPEAKONPHOENIX TERMINAL
Function
Front panelFront panel indicator: Working indicator, Signal/Clip/Protection/Power on/-5db/-10db/-20db / volume control knob
Rear panelStereo/parallel/bridge selection switch
Dimensions/Weight
Product Dimension(mm)384 x 140 x 85384 x 140 x 85384 x 140 x 85384 x 140 x 85
Packaging Dimension(mm)455 x 255 x 175455 x 255 x 175455 x 255 x 175455 x 255 x 175
G.W.3.5kg3.6kg3.9kg4.0kg

Remark:
1、*Power tested under EIA standard.
2、**Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
3、SAE reserves the right to make any changes to the product specifications without prior notice. Final pecifications to be found in the user manual.

Power Amplifkatörler
Power Amplifikatörler Features Class D power modules. XLR signal input and link connectors. SpeakON NL4 and binding-post output connectors. Routing mode selector on the back panel (stereo / bridge / parallel). Channel independent power and 0dB /-5dB / -10dB / -20dB/ indicators on the front panel. Channel independent protection and clip warning indicators on the front panel. Ultra-low unit weight. Fresh and sweet sounding characteristics.

Sae Suitcase Serisi Power Amlifikatör

  • Markalar Sae Audio
  • Ürün Kodu: Sae Suitcase Serisi Power Amlifikatör
  • Stok Durumu: Stokta var
  • $0,00

  • Vergiler Hariç: $0,00

Etiketler: Sae Suitcase Serisi Power Amlifikatör